Audio Technica PRO 35 Condenser Clip-on Instrument Microphone

Product:	Audio Technica PRO 35 Condenser Clip-on Instrument Microphone
Brand:	Audio Technica
Item number / Code:	105338 / AT-PRO35
Current availability:	0 pcs.
Note! The price of this product may have changed. Please contact our team to receive more information on the availability and price of this item.
Key words:	Audio Technica PRO 35 Condenser Clip-on Instrument Microphone, Audio Technica PRO35, PRO35
Ask a Product Expert:	Marcin Zdziabek, tel. +48 717974679, email: [email protected]

Audio Technica PRO 35
Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Specifications:
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 50-15,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
• OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa
• IMPEDANCE 250 ohms
• MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical) 115 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 64 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
• SWITCH: Flat, roll-off
• WEIGHT (MICROPHONE): 8 g
• WEIGHT (POWER MODULE) 81 g
• DIMENSIONS (MICROPHONE) 25.0 mm long, 10.2 mm diameter
• DIMENSIONS (POWER MODULE) 92.9 mm long, 18.9 mm diameter
• OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
• CABLE 1.8 m long (permanently attached to microphone), 2.6 mm diameter, 2-conductor, shielded cable with TA3F-type connector
• ACCESSORIES FURNISHED: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch