Audio Technica AEW-R5200 UHF Receiver (True Div.)

Audio Technica AEW-R5200 UHF Receiver
Features of AEW-R5200 dual receiver:
• Dual receiver configuration with integral antenna distribution and power supply
• IntelliScan™ automatic frequency scanning and selection on all linked receivers
• Ethernet 10 base T data/control connection to an external computer
• Two compatible frequency bands with 996 selectable frequencies each
• 25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments
• True diversity receivers with dual IF design for dropout free and silent automatic switching
• Up to 40 systems compatible using both bands
• High-efficiency dual companding system for flawless audio
• Digital Tone Lock™ squelch that communicates transmitter data to the receiver
• Adjustable receiver squelch
• Receiver internal function menu with soft-touch controls
• High visibility white-on-blue LCD receiver status display
• All components store up to five preset user configurations, including names
• Operator alert indicators
• Rear panel or external antenna mount options with 12-volt antenna power
• Balanced XLR-type and TRS outputs with three-position attenuator and ground lift switch
• Headphone output with independent level control, selectable between receiver one and two
• Flexible 1/2 wave antennas supplied for superior range
• Dual receiver mounts in a single rack space with included metal front and rear rack mounts
• External control of channel mute via a switch closure input on the real panel
• Auxiliary AC pass-through outlet powers other receivers with only one AC input
• Transmitter battery life gauge on the front panel of receiver

Specifications:
• Receiving system: Dual independent RF sections, automatic-switching diversity
• Image rejection 60 dB typical
• S/R ratio: 115 dB at 40 kHz deviation (IEC-weighted), 75 kHz maximum modulation
• THR ≤1% (10 kHz deviation at 1 kHz)
• Sensitivity 20 dBµV (S/N 70 dB at 5 kHz deviation, IEC-weighted)
• Intermediate frequency 65.75 MHz, 10.7 MHz
• Audio output (attn switch at "0") Microphone: 25 mV, Instrument: 50 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load) Both outputs are transformer isolated and balanced
• Audio output attenuator (ATTN): Three-position switch: 0 / –6 / –12 dB
• Output connectors: Microphone: XLRM-type, balanced; Instrument: 6.3 mm (1/4 ") TRS balanced phone jack
• Headphone output: Connector: 6.3 mm TRS (“stereo”) phone jack, Power output: 10 mW + 10 mW into 32 ohms (at 1 kHz, ±5 kHz deviation); maximum output: 220 mW + 220 mW into 32 ohms. Headphones switchable between Channel 1 and Channel 2.
• External mute: 6.3 mm TS unbalanced phone jack, each channel
• Antenna power: DC 10V-12V, 20 mA (BNC-type jack)
• Computer interface: Type: Ethernet, 10BaseT mode, Connector: RJ-45, Proprietary Software: supplied on CD-ROM
• Power supply: 100-240V AC 50/60 Hz, 15W
• Dimensions: 482.0 mm (18.98") W x 275.5 mm (10.85") D x 44.0 mm (1.74") H
• Net weight: 4.0 kg
• Accessories included: Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable; IEC-type AC pass-through cable; front-mount antenna cables and connectors; CD-ROM with computer control interface software