FBT Mitus 118SA PROCESSED ACTIVE SUBWOOFER 1200W RMS

FBT Mitus 118SA PROCESSED ACTIVE SUBWOOFER 1200W RMS

The MITUS 118SA is a powered vented bandpass designed subwoofer with a 3/4"(18mm)Baltic birch plywood cabinet featuring a B&C 18" neodymium magnet woofer with a 3" voice coil and powered by a 1200w RMS Class D Amp with switch mode power supply. With a frequency response down to 36Hz, the Mitus 118sa delivers 139db SPL. and features a Baltic birch plywood cabinet, with a heavy duty grille and with a dust/moisture protection foam backing.Completely Made In Italy

• Compact vented band pass subwoofer design enclosure
• 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’) voice coil
• Frequency response from 36Hz to 100Hz
• Class D amplifier delivering 1200WRMS
• Switch mode power supply
• DSP with 8 presets, cardioids and infra configurations, delay
• Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift
• 18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint
• Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles
• Optional 4 swivel-mount casters 80 mm (3.15’’) on request
• Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base
• Configuration: 1 way
• Built-in amplifier LF/HF: 1200 W RMS
• Built-in amplifier peak LF/HF: 2400 W
• Frequency response: 36Hz - 100Hz -6dB
• Low Frequency woofer: 1x18 - 3coil neodymium inch
• High Frequency driver: - inch
• Maximum SPL cont/peak: 135/139 half-space dB
• Dispersion: omnidirectional HxV
• Input impedance: 22 Kohm
• Crossover Frequency: preset dependent KHz
• AC Power requirements: 640 VA
• Input connector: XLR with loop
• Power cord: 5/16.4 m/ft
• Net Dimension (WxHxD): 574x594x730 - 22.6x23.4x28.7 mm/inch
• Net Weight: 47/103.6 kg/lb
• Transport Dimension (WxHxD): 460x775x765 - 18.1x30.5x30.1 mm/inch
• Transport Weight: 56.2 / 123.9 Kg/lb