Rode RodeLink Filmmaker Kit

Rode RodeLink Filmmaker Kit

RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

Features:

• Series II, 2.4GHz digital transmission
• 128-bit encryption
• Up to 100 metres range*
• OLED display (on receiver)
• One button pairing
• Three level gain control
• AA battery or USB powered
• Includes RØDE's broadcast Lavalier microphone

Specifications:

• Type of transmission: 2.4 GHz Fixed Frequency Agile System
• The dynamic range of the system: 112dB
• Range: 100 m
• Frequency Response: 35 Hz - 22 kHz
• Maximum Output Level: 1V Rms (2.8 V pp)
• Maximum Input Level: 1V Rms (2.8 V pp)
• Maximum latency: 4 ms

Receiver (RX-CAM):
• Power: 2 x AA batteries or a microUSB
• Antenna: Internal
• Output connector: lockable connector 3.5 mm TRS - Dual Mono
• Output Impedance: 300Ω
• Dimensions: 111 x 65 x 52 mm
• Weight: 190g

The transmitter (TX-BELT):
• Power: 2 x AA batteries or a microUSB
• Antenna: Internal
• Output connector: Blocked TRS 3.5mm jack
• Output Impedance: 300Ω
• Dimensions: 111 x 65 x 40 mm
• Weight: 190g

Lapel:
• Principle: The pressure-gradient
• Active Electronics: JFET impedance converter
• Capsule: 0.10 "
• orientation relative to the axis: Front
• Frequency response: 60Hz - 18kHz
• Output impedance: 3000Ω
• Maximum SPL: 110 dB SPL (at 1 kHz, 1% THD with a load of 1 Kohm)
• Maximum output level: 189.0 dBu (at 1 kHz, 1% THD with a load of 1 Kohm)
• Sensitivity: -33,5dB, 1V / Pa (21,00mV at 94 dB SPL) +/- 2 dB at 1kHz
• Equivalent noise level A-weighted - 25dB-A
• Weight: 1.00 g
• Dimensions: 12 x 4.5 x 4.5 mm